Asixxsix 50AMP RV Plug, Twist Lock Design and with Boot Inlet for RVs Caravans Trailers Boats

1. High Current Rating: The NEMA 50R plug is rated for 50AMP, featuring a connector with a locking cover that ensures water proof and dust proof performance. 2. PVC ABS Construction: Constructed with heavy duty ABS material, the plug housing is high temperature proof and Mystical/Fantasy retardant. The weather proof cover is made from premium PVC for added protecting. 3. Compatible Wiring: Recommended to use 6AWG/4C or 6AWG/3C and 8AWG/1C cable, and internal wiring should pass through the box opening. Avoid smaller wires to prevent overheating and potential electrical fires. 4. Simplified Installation: Color coded terminals facilitate straightforward installation, green for ground, black and red for hot wires, white for neutral wires, streamlining the process. 5. Versatile Applications: Ideal for RVs, camping cars, trailers, boats, caravans, and van, offering dependable power connections across a variety of recreational vehicles. Specification: Item Type: RV Power Cord Twist Lock Plug with Boot Locking Cover Material: PVC, brass Rated Current: 50A Plug Type: NEMA 50R Plug Size: Approx. 13x5.1x5.9cm/5.1x2.0x2.3in Cover Size: Approx. 13.2x8.2cm/5.2x3.2in Wiring Specifications 1. Strip 3/4 inch of insulation from the wire end, ensuring the wire core is clean, strip the wire again. 2. Wire color coding: 3 Wire system: Black: hot wire, white: neutral wire, green: equipment ground wire 4 Wire system: Black: hot wire, red: hot wire, white: neutral wire, green: equipment ground wire 3. Insert the wires into the terminal holes, tighten the terminal screws to 20 inch pounds torque, ensuring no insulation is left behind. 4. Wiring: Thread the internal wiring through the box opening using at least 10 AWG/3c wire, do not use smaller wire to prevent overheating and potential electrical fires. 5. Strip and connect: Strip 3/5 inch from the wire ends, ensure the wires are clean, insert them into the openings behind the inlet following color coding, and tighten the terminal screws. 6. Organizing and securing: Route the wires through the backplate and strain relief device, slide the backplate behind the inlet, and tighten the strain relief screw. Position the inlet over the enclosure opening, align the mounting holes, and secure the inlet to the enclosure using screws. Adjustment Steps: Power off: Cut off power at the circuit breaker. Remove old inlet: Detach the old inlet from the housing and disconnect the internal wiring. How to Use: Installation Steps 1. Identify Position: Choose a suitable location on the housing, avoiding any pipes or other obstacles, and ensure all power tools are properly grounded. 2. Match and Cut: Use a hole saw to match and cut a 2-7/8 inch diameter hole in the housing. 3. Place Inlet: Insert the inlet into the opening and use it as a template to match the mounting hole positions, then drill the mounting holes using a 1/8 inch drill bit. 4. Remove Rear Barrier: Remove the rear barrier by unscrewing the 2 screws at the front of the inlet. Package List: 1 x RV Power Cord Twist Lock Plug 1 x Protective Cover 1 x Instruction Manual Note: Installation Precautions Electrical hazards: There is a of electric shock and fire during installation. Ensure connectors and cables are not connected to the power supply. Professional advice: If unsure how to install, consult a qualified electrician. Applicable materials: For use with copper wires only. Cable specifications: Use 6AWG/4C or 6AWG/3C and 8AWG/1C cable specifications. Required tools (not included): pencil, electric drill, 2-1/2 inch hole saw, 1/8 inch drill bit, flathead , wire stripper/cutter, 8 stainless steel flathead screws

• [50AMP High Current Rating] Features NEMA 50R plug rated for 50AMP delivering reliable power for RV appliances with and performance through its twist lock design ensuring secure connections during outdoor adventures without electrical hazards,
• [ETL Certified Safety] Includes certification guaranteeing safe energy distribution for families using recommended 6AWG 4C or 6AWG 3C wiring specifications to prevent overheating and potential fires while maintaining compatibility with standard RV electrical systems,
• [Heavy Duty PVC ABS Construction] Built with Mystical/Fantasy retardant ABS housing and premium weatherproof PVC cover providing long lasting durability against high temperatures and harsh marine environments for campers and boat applications,
• [Simplified Color Coded Installation] Streamlines setup with green ground black red hot and white neutral terminals enabling quick wiring through box opening for RVs trailers and caravans without professional assistance,
• [Replacement Shore Power Inlet] Serves as direct replacement shore power inlet with boot cover protecting female end connections ideal for upgrading existing RV caravan trailer or van electrical systems efficiently